China High quality Huayan Compressor System Manufacturers – High Stable Belt Driven Ammonia unloading compressor – Huayan
China High quality Huayan Compressor System Manufacturers – High Stable Belt Driven Ammonia unloading compressor – Huayan Detail:
Ammonia unloading compressor
product description
This series of oil-free lubrication compressors is one of the products produced by our company. The product has the characteristics of low rotation speed, high component strength, stable operation, long service life, and convenient maintenance. Among them, the ZW series compressor is in the form of a unit. It integrates compressor, gas-liquid separator, filter, two-position four-way valve, safety valve, check valve, explosion-proof motor, and chassis. It has the characteristics of small size, lightweight, low noise, good airtightness, easy installation, and simple operation.
This product is mainly used for unloading, loading, refilling, gas recovery, and residual liquid recovery of LPG/C4, propylene, and liquid ammonia. It is widely used in gas, chemical, energy, and other industries, and is the key equipment for gas, chemical, energy, and other industries.
Note: In the process of unloading, the compressor pressurizes the gas from the storage tank and then presses it into the tank truck through the gas phase pipeline, and presses the liquid from the tank truck to the storage tank through the pressure difference of the gas phase to complete the unloading process. When the gas phase is pressurized, the temperature of the gas phase will increase. At this time, it is not necessary to perform forced cooling, because if the gas phase is compressed and then cooled, it is easy to liquefy and it is difficult to establish a pressure difference in the gas phase, which is not conducive to the replacement of the gas phase and the liquid phase. In short, it will cause an extension of the unloading process time. If residual gas recovery is required, a cooler can be used to forcibly cool the gas phase during the residual gas recovery operation in order to recover the residual gas as soon as possible.
The loading process is opposite to the unloading process.
|
NO |
Model |
（Nm3/h） |
Inlet pressure （Mpa） |
Outlet pressure （Mpa） |
Moter POWER （KW） |
Dimensions （mm） |
|
1 |
ZW-0.6/16-24 |
550 |
1.6 |
2.4 |
11 |
1000×580×870 |
|
2 |
ZW-0.8/16-24 |
750 |
1.6 |
2.4 |
15 |
1000×580×870 |
|
3 |
ZW-1.0/16-24 |
920 |
1.6 |
2.4 |
18.5 |
1000×580×870 |
|
4 |
ZW-1.5/16-24 |
1380 |
1.6 |
2.4 |
30 |
1000×580×870 |
|
5 |
ZW-2.0/16-24 |
1500 |
1.6 |
2.4 |
37 |
1000×580×870 |
|
6 |
ZW-2.5/16-24 |
1880 |
1.6 |
2.4 |
45 |
1000×580×870 |
|
7 |
ZW-3.0/16-24 |
2250 |
1.6 |
2.4 |
55 |
1000×580×870 |
|
8 |
ZW-0.8/10-16 |
450 |
1.0 |
1.6 |
11 |
1100×740×960 |
|
9 |
ZW-1.1/10-16 |
600 |
1.0 |
1.6 |
15 |
1100×740×960 |
|
10 |
ZW-1.35/10-16 |
750 |
1.0 |
1.6 |
18.5 |
1100×740×960 |
|
11 |
ZW-1.6/10-16 |
950 |
1.0 |
1.6 |
22 |
1400×900×1180 |
|
12 |
ZW-2.0/10-16 |
1200 |
1.0 |
1.6 |
30 |
1400×900×1180 |
|
13 |
ZW-2.5/10-16 |
1500 |
1.0 |
1.6 |
37 |
1400×900×1180 |
|
14 |
ZW-3.0/10-16 |
1800 |
1.0 |
1.6 |
45 |
1400×900×1180 |
|
15 |
ZW-0.6/16-24 |
550 |
1.6 |
2.4 |
11 |
1500×800×1100 |
|
16 |
ZW-0.8/16-24 |
750 |
1.6 |
2.4 |
15 |
1500×800×1100 |
|
17 |
ZW-1.0/16-24 |
920 |
1.6 |
2.4 |
18.5 |
1500×800×1100 |
|
18 |
ZW-1.5/16-24 |
1380 |
1.6 |
2.4 |
30 |
1600×900×1200 |
|
19 |
ZW-2.0/16-24 |
1500 |
1.6 |
2.4 |
37 |
1600×900×1200 |
|
20 |
ZW-2.5/16-24 |
1880 |
1.6 |
2.4 |
45 |
1600×900×1200 |
|
21 |
ZW-3.0/16-24 |
2580 |
1.6 |
2.4 |
55 |
1600×900×1200 |
|
22 |
ZW-3.5/16-24 |
3000 |
1.6 |
2.4 |
55 |
1600×900×1200 |
|
23 |
ZW-4.0/16-24 |
3500 |
1.6 |
2.4 |
75 |
1600×900×1200 |
|
24 |
ZW-0.2/10-25 |
100 |
1 |
2.5 |
5.5 |
1000×580×870 |
|
25 |
ZW-0.4/10-25 |
220 |
1 |
2.5 |
11 |
1000×580×870 |
|
26 |
ZW-0.6/10-25 |
330 |
1 |
2.5 |
15 |
1000×580×870 |
|
27 |
ZW-0.2/25-40 |
260 |
2.5 |
4 |
7.5 |
1000×580×870 |
|
28 |
ZW-0.4/25-40 |
510 |
2.5 |
4 |
15 |
1000×580×870 |
|
29 |
ZW-0.5/25-40 |
660 |
2.5 |
4 |
18.5 |
1000×580×870 |
|
30 |
ZW-0.3/20-30 |
300 |
2 |
3 |
7.5 |
1000×580×870 |
|
31 |
ZW-0.4/20-30 |
420 |
2 |
3 |
11 |
1000×580×870 |
|
32 |
ZW-0.5/20-30 |
540 |
2 |
3 |
15 |
1000×580×870 |
|
33 |
ZW-0.6/20-30 |
630 |
2 |
3 |
15 |
1000×580×870 |
|
34 |
ZW-1.6/20-30 |
1710 |
2 |
3 |
37 |
1400×900×1180 |
Product detail pictures:
Related Product Guide:
We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for China High quality Huayan Compressor System Manufacturers – High Stable Belt Driven Ammonia unloading compressor – Huayan , The product will supply to all over the world, such as: Victoria, Oman, Slovakia, All our staffs believe that: Quality builds today and service creates future. We know that good quality and the best service are the only way for us to achieve our customers and to achieve ourselves too. We welcome customers all over the word to contact us for future business relationships. Our products are the best. Once Selected, Perfect Forever!
By Amelia from Paraguay - 2018.12.30 10:21
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Danny from Los Angeles - 2017.06.29 18:55
