OEM Hydrogen Compressor Model Manufacturers – High Stable Belt Driven Ammonia unloading compressor – Huayan

Short Description:

Product Detail

Product Tags

Feedback (2)

We've been committed to offering easy,time-saving and money-saving one-stop purchasing support of consumer for Nitrogen System Cost, Nitrogen Filter Membrane, Liquid Oxygen Tank, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

OEM Hydrogen Compressor Model Manufacturers – High Stable Belt Driven Ammonia unloading compressor – Huayan Detail:

AMMONIA UNLOADING COMPRESSOR

Ammonia unloading compressor
product description
This series of oil-free lubrication compressors is one of the products produced by our company. The product has the characteristics of low rotation speed, high component strength, stable operation, long service life, and convenient maintenance. Among them, the ZW series compressor is in the form of a unit. It integrates compressor, gas-liquid separator, filter, two-position four-way valve, safety valve, check valve, explosion-proof motor, and chassis. It has the characteristics of small size, lightweight, low noise, good airtightness, easy installation, and simple operation.
This product is mainly used for unloading, loading, refilling, gas recovery, and residual liquid recovery of LPG/C4, propylene, and liquid ammonia. It is widely used in gas, chemical, energy, and other industries, and is the key equipment for gas, chemical, energy, and other industries.

Note: In the process of unloading, the compressor pressurizes the gas from the storage tank and then presses it into the tank truck through the gas phase pipeline, and presses the liquid from the tank truck to the storage tank through the pressure difference of the gas phase to complete the unloading process. When the gas phase is pressurized, the temperature of the gas phase will increase. At this time, it is not necessary to perform forced cooling, because if the gas phase is compressed and then cooled, it is easy to liquefy and it is difficult to establish a pressure difference in the gas phase, which is not conducive to the replacement of the gas phase and the liquid phase. In short, it will cause an extension of the unloading process time. If residual gas recovery is required, a cooler can be used to forcibly cool the gas phase during the residual gas recovery operation in order to recover the residual gas as soon as possible.
The loading process is opposite to the unloading process.

NO	Model	（Nm3/h）	Inlet pressure （Mpa）	Outlet pressure （Mpa）	Moter POWER （KW）	Dimensions （mm）
1	ZW-0.6/16-24	550	1.6	2.4	11	1000×580×870
2	ZW-0.8/16-24	750	1.6	2.4	15	1000×580×870
3	ZW-1.0/16-24	920	1.6	2.4	18.5	1000×580×870
4	ZW-1.5/16-24	1380	1.6	2.4	30	1000×580×870
5	ZW-2.0/16-24	1500	1.6	2.4	37	1000×580×870
6	ZW-2.5/16-24	1880	1.6	2.4	45	1000×580×870
7	ZW-3.0/16-24	2250	1.6	2.4	55	1000×580×870
8	ZW-0.8/10-16	450	1.0	1.6	11	1100×740×960
9	ZW-1.1/10-16	600	1.0	1.6	15	1100×740×960
10	ZW-1.35/10-16	750	1.0	1.6	18.5	1100×740×960
11	ZW-1.6/10-16	950	1.0	1.6	22	1400×900×1180
12	ZW-2.0/10-16	1200	1.0	1.6	30	1400×900×1180
13	ZW-2.5/10-16	1500	1.0	1.6	37	1400×900×1180
14	ZW-3.0/10-16	1800	1.0	1.6	45	1400×900×1180
15	ZW-0.6/16-24	550	1.6	2.4	11	1500×800×1100
16	ZW-0.8/16-24	750	1.6	2.4	15	1500×800×1100
17	ZW-1.0/16-24	920	1.6	2.4	18.5	1500×800×1100
18	ZW-1.5/16-24	1380	1.6	2.4	30	1600×900×1200
19	ZW-2.0/16-24	1500	1.6	2.4	37	1600×900×1200
20	ZW-2.5/16-24	1880	1.6	2.4	45	1600×900×1200
21	ZW-3.0/16-24	2580	1.6	2.4	55	1600×900×1200
22	ZW-3.5/16-24	3000	1.6	2.4	55	1600×900×1200
23	ZW-4.0/16-24	3500	1.6	2.4	75	1600×900×1200
24	ZW-0.2/10-25	100	1	2.5	5.5	1000×580×870
25	ZW-0.4/10-25	220	1	2.5	11	1000×580×870
26	ZW-0.6/10-25	330	1	2.5	15	1000×580×870
27	ZW-0.2/25-40	260	2.5	4	7.5	1000×580×870
28	ZW-0.4/25-40	510	2.5	4	15	1000×580×870
29	ZW-0.5/25-40	660	2.5	4	18.5	1000×580×870
30	ZW-0.3/20-30	300	2	3	7.5	1000×580×870
31	ZW-0.4/20-30	420	2	3	11	1000×580×870
32	ZW-0.5/20-30	540	2	3	15	1000×580×870
33	ZW-0.6/20-30	630	2	3	15	1000×580×870
34	ZW-1.6/20-30	1710	2	3	37	1400×900×1180

Product detail pictures:

Related Product Guide:

We know that we only thrive if we can guarantee our combined price tag competiveness and top quality advantageous at the same time for OEM Hydrogen Compressor Model Manufacturers – High Stable Belt Driven Ammonia unloading compressor – Huayan , The product will supply to all over the world, such as: United States, Florence, Belize, Look forward to the future, we'll focus more on the brand building and promotion . And in the process of our brand global strategic layout we welcome more and more partners join us, work together with us based on mutual benefit. Let's develop market by fully utilizing our in depth advantages and strive for building.

Bailian Compressor