ZW-1.1/10-16 LPG Oil Free Compressor
The products have low rotational speed, high component strength, and are characterized by smooth operation, long service life, and easy maintenance. Among them, the ZW series compressors are in unit form. They integrate compressors, gas-liquid separators, filters, two-way four-port valves, safety valves, check valves, explosion-proof motors, and chassis into one unit. They are characterized by small size, light weight, low noise, good sealing, easy installation, and simple operation.
This product is mainly used for unloading, loading, tank draining, gas recovery, and residual liquid recovery of liquefied petroleum gas (LPG), tetrafluoroethylene (C4), propylene, and liquid ammonia. It is widely used in industries such as gas, chemical, and energy, and is a key equipment in the gas, chemical, and energy industries.
Note: During the unloading process, the compressor pressurizes the gas from the storage tank and injects it into the tanker through the gas phase pipeline. The liquid is pressurized from the tanker to the storage tank by the pressure difference in the gas phase, completing the unloading process. During gas phase pressurization, the gas temperature increases, and forced cooling is not required because if the gas phase is cooled after compression, it is prone to liquefaction, making it difficult to establish a gas phase pressure difference and not conducive to the displacement of gas and liquid phases. In short, it would prolong the unloading process. If gas recovery is required, a cooler can be used to forcibly cool the gas phase during the gas recovery operation to facilitate prompt gas recovery.
The loading process is the reverse of the unloading process.
Liquefied gas/C4 loading and unloading compressors
|
S/N |
Model |
Power（KW) |
Dimensions(mm) |
Loading and unloading capacity / h (t/h) |
|
1 |
ZW-0.25/10-16 |
4 |
1000×710×865 |
~5.5 |
|
2 |
ZW-0.4/10-16 |
5.5 |
1000×710×865 |
~9 |
|
3 |
ZW-0.5/10-16 |
7.5 |
1000×710×865 |
~11 |
|
4 |
ZW-0.6/10-16 |
7.5 |
1000×710×865 |
~13 |
|
5 |
ZW-0.8/10-16 |
11 |
1000×710×865 |
~17.5 |
|
6 |
ZW-1.1/10-16 |
15 |
1000×710×865 |
~24 |
|
7 |
ZW-1.35/10-16 |
18.5 |
1000×710×865 |
~30 |
|
8 |
ZW-1.6/10-16 |
22 |
1400×900×1180 |
~35 |
|
9 |
ZW-2.0/10-16 |
30 |
1400×900×1180 |
~45 |
|
10 |
ZW-2.5/10-16 |
37 |
1400×900×1180 |
~55 |
|
11 |
ZW-3.0/10-16 |
45 |
1400×900×1180 |
~65 |
|
12 |
ZW-4.0/10-16 |
55 |
1400×900×1180 |
~85 |
|
13 |
VW-5.0/10-16 |
75 |
2000×1700×1400 |
~110 |
|
14 |
VW-6.0/10-16 |
90 |
2000×1700×1400 |
~130 |
|
15 |
VW-8.0/10-16 |
110 |
2000×1700×1400 |
~174 |
|
16 |
ZG-0.75/10-15 |
11 |
1450×800×1300 |
~16.3 |
|
17 |
2DG-1.5/10-16 |
22 |
1860×1680×930 |
~32.6 |
The unloading capacity is calculated based on the suction pressure of 1.0MPa, discharge pressure of 1.6MPa, inlet temperature of 40℃, and liquefied gas liquid density of 582.5kg/m3. The unloading capacity may change with variations in operating conditions and is provided for reference purposes only.
Xuzhou Huayan Gas Equipment Co.,Ltd, exporting diaphragm compressor, piston compressor, oxygen generator, gas cylinder and nitrogen generators with good quality and low price. Our company has accumulated a wealth of design and manufacturing experience,and has a complete technical testing equipment and methods. We can design, manufacture and install products according to the customer's parameters.Our products have been exported to Indonesia, Egypt, Vietnam, Korea, Thailand, Finland, Australia, Czech Republic, Ukraine, Russia and other countries. We can provide complete one-stop solutions for every customer all over the world, and guarantee that every customer can be assured of quality products and excellent service attitude.
